LIGHT MATERIAL / SNOW
Hauer offers different buckets in a wide range of sizes and designs, especially for applications with large handling volumes with lightweight material. The Hauer buckets can also be used for snow loading.
The Hauer light material bucket is a bespoke development for handling snow, grain, woodchips
and similar materials.
The special shape of the Hauer earth bucket proves practical construction. The bucket is curved and smooth, so there is no sticking of cargo in corners. The right-angle rear edge of the bucket is perfect for leveling backwards.
The cutting edge is made of hardened, wear-resistant high-performance steel with a hardness of approx. 450 HB and thus guarantee a long service life.
Reeinforced Version
For heavy work, the earth bucket is also available in a reinforced version:
- Bucket bottom with more and stronger wear-strips
- Side parts are made of thicker steel
- Reinforcement angle on the upper edge of the bucket
- Reinforced leveling angle
- Cutting edge 20 mm, thicker by 4 mm
Optional additional cutting edge
As an additional wear protection the a second cutting edge screwed below the welded cutting edge. This additional cutting edge can be turned and used on both sides.
For large volumes of light bulk material the large sized bucket is recommended.
further information ...It is typically used for light material such as fertiliser, bark mulch or wood chips. To withstand the strian, additional reinforcements and a bar in the middle foster stability and give a maximum of stability.
Optional additional cutting edge
As an additional wear protection the a second cutting edge screwed below the welded cutting edge. This additional cutting edge can be turned and used on both sides.
High Tip - Light Material Bucket - HK-LGS
The high tip - light material bucket is especially used wherever high loading heights are required.
further information ...
The free dumping height at the lower edge of the shovel is approx. 550 mm over the rotating point of the loading arm (varying due to attachment height / tyres of the tractor). In comparison to the standard light material bucket, it is 1600 mm higher.
The high-tip light material buckets are available in widths of 2000 to 2600 mm.
Optimum dumping height for efficient work
Even larger trailers, containers and trucks with over 4 m can easily loaded. Therefore it is ideally used for loading wood chips or grain.
Use with wheel and telescopic loaders
Because of higher system hydraulic pressure, a pressure relief valve for the cylinders has to be mounted. Fiiting coupling plates are available on request.
